Heating Installation in South Jersey
When you need furnace installation in South Jersey, turn to the home heating pros homeowners have trusted for nearly five decades. Take a look at what goes into replacing a furnace designed to provide lasting efficiency and comfort for your Cherry Hill, Voorhees, Sicklerville, or Washington Township area home, and call Bovio Rubino Service for professional, reliable, 5-star heating system installation.
How to Size a Furnace, Boiler, or Heat Pump
Purchasing the right heating system for your home requires adequate sizing methods. A common rule of thumb says to estimate you need 30 to 60 BTU of heat per square foot.
For more accurate sizing, you must also take the climate, home orientation, window layout, insulation level, air infiltration rate, and interior heat gain into account. That’s why your best bet is to trust an experienced furnace installer to recommend the right furnace size based on your needs.
What Type of Furnace is Best for Your Home?
Choosing the best type of furnace for your home depends on various factors, including your location, fuel availability, energy efficiency preferences, and budget. Here are the common types of furnaces and considerations for each:
- Best for: Homes with access to natural gas.
- Pros: Generally more energy-efficient and cost-effective than electric furnaces. Provides quick and effective heating.
- Cons: Requires a gas line, and the availability of natural gas may vary by location.
- Best for: Homes without access to natural gas.
- Pros: Easy installation, no need for a gas line. Can be more environmentally friendly if powered by renewable energy.
- Cons: Generally higher operating costs compared to gas furnaces, especially in areas with expensive electricity.
- Best for: Homes without access to natural gas or electricity.
- Pros: Can be a cost-effective heating option. Works well in colder climates.
- Cons: Requires an on-site oil tank, and oil prices can be subject to fluctuations. Regular maintenance is crucial.
- Best for: Homes without access to natural gas but with propane availability.
- Pros: Cleaner-burning compared to oil. Can be more energy-efficient than electric furnaces.
- Cons: Requires a propane tank, and fuel costs can fluctuate.
High-Efficiency Condensing Furnace:
- Best for: Homes seeking high energy efficiency.
- Pros: Condensing furnaces extract additional heat from combustion gases, making them more efficient. Often use sealed combustion systems, improving safety.
- Cons: Higher upfront costs, but the energy savings can offset this over time.
Dual-Fuel or Hybrid Furnace:
- Best for: Homes in areas with varying fuel costs.
- Pros: Combines a heat pump with a gas or propane furnace, allowing you to switch between the two based on outdoor temperatures for optimal efficiency.
- Cons: Complex systems may have higher installation costs.
- Best for: Homes looking for more precise temperature control.
- Pros: Variable-speed furnaces adjust the airflow to meet heating demands more efficiently, providing better comfort and energy savings.
- Cons: Higher upfront costs, but increased efficiency may offset this over time.
When selecting a furnace, consider factors such as your local climate, the availability of fuel sources, upfront and operating costs, and your home's insulation and size. It's often beneficial to consult with HVAC professionals who can assess your specific needs and recommend the most suitable furnace for your home. Additionally, look for ENERGY STAR-rated products to ensure energy efficiency and potential eligibility for rebates or incentives.
Upgrade to a High-Efficiency Furnace or Heat Pump
As you compare furnaces, you’ll notice a correlation between efficiency and purchase price. Simply put, more advanced, expensive parts are required to manufacture furnaces that achieve near 100 AFUE, or near 100% efficiency. Standard furnaces lack these advanced features, so they usually come in closer to 80 AFUE, the current national minimum for furnace efficiency.
If you’re willing to spend a little more upfront, a high-efficiency furnace could pay you back over the next several winters by lowering your energy bills. Let us help you calculate the return on investment for the furnaces you’re considering to see whether the higher cost of an advanced furnace is worth it. With our chilly winters here in South Jersey, the answer is probably “yes!”
How Much Does It Cost to Install a Furnace?
The answer can depend very heavily on a wide range of factors. The efficiency of your furnace or central heating system, its size, the type of home the system is being installed in, and which of the local furnace installation companies you choose will all impact the furnace installation cost.
What is the Average Life Expectancy of a Gas Furnace?
Typically, a gas furnace should operate effectively for between 10 and 15 years with no issues at all. However, keep in mind that even with the best heating system on the market, these projections assume you’re scheduling annual heating maintenance!
What is the Most Efficient Home Heating System?
The question of efficiency can be a fairly complex one. At face value, a gas furnace or high-efficiency electric furnace can be excellent for many homes, while some homeowners might get better mileage out of a heat pump.
How Much Does It Cost to Install a New HVAC System?
A new central heating system installation or HVAC system installation in New Jersey can cover a wide range of prices based on the type of system you choose, whether or not you need ductwork installed, and the rates offered by your heating contractor.
More times than not, when it comes to making sure your home’s heating system is operating correctly and efficiently, the question becomes, “Should I repair or replace my furnace?” Sure, you could make stabs in the dark as to how to best secure a comfortable home for the remainder of the winter.
Here are some of the factors that you should consider when trying to choose between furnace repair and furnace replacement:
- Your heater is getting old: On average, furnaces last no longer than 15 to 20 years, and heat pumps start to show their age after only a decade (since they work year-round to both heat and cool your home). If your equipment is approaching the end of its anticipated life span, now’s the time to start shopping for a replacement so you aren’t left scrambling at the last minute when your equipment ultimately gives out.
- Utility costs are rising: Furnaces and heat pumps lose efficiency temporarily when there’s a problem with the equipment but permanently when they get older. Have your system looked at first, but if it’s getting old, it’s probably time for a replacement.
- You paid for repairs recently: If your heater has already broken down twice or more in the last two years and it breaks down yet again, your money is better spent on a replacement.
- An upcoming repair is too costly: Perhaps you hear strange noises coming from the heater or you notice the burner flame glowing yellow instead of blue. These are issues you can’t ignore because they may indicate serious problems with the equipment. However, if the cost to repair these problems approaches 50% of the cost to buy a new heater, it’s time to trade out the equipment.
- Home comfort is declining: Your furnace or heat pump may be on its last legs if you notice the temperature between rooms feels completely different. You may also find yourself continually adjusting the thermostat just to stay comfortable. These comfort problems will go away if you opt for a replacement.
The furnace and boiler technicians at Bovio Rubino Service are specially trained to diagnose, maintain, and correct problems for your entire system. Our training allows our technicians to properly adjust system controls to factory-recommended specifications and test the performance of the entire system. This provides you with everything you need to keep your home warm throughout the winter while knowing you aren’t spending any more than you need to on your monthly heating costs!
Keep Your Furnace at Peak Efficiency With an Annual Tune-Up
Our furnace tune-up includes a 20-point inspection aimed at locating any inefficiencies that could be costing you comfort and energy. Our 20-point heating tune-up includes:
Support each other in a positive and encouraging way
Meet and exceed client needs and expectations
Always do what is right
Respect our client's homes and businesses
Treat team members and clients as if they were family
Book appointments around the clock with a real person or contact us using the button below.
Should You Fix Your Furnace Yourself?
Installing a furnace is not a do-it-yourself job. Even if you’re an avid handyman, self-installation is a bad idea if you don’t have the training and certification to install and test a furnace. Here’s why:
- Safety: This is a big concern if you attempt the job yourself because furnaces are combustion appliances. Improper installation could allow carbon monoxide leaks or back-drafting to pollute your indoor air. Mounting the furnace wrong could also lead to unstable equipment that falls over and becomes damaged.
- Precision: Careful installation is also required to maximize energy efficiency. If you end up purchasing a high-performance furnace, you’ll enjoy the full benefits if a qualified technician performs the installation.
- Professionalism: Also, if your furnace warranty is important to you, professional installation is a must. Attempting the job yourself without a license could void the warranty, leaving you to foot the bill for premature repairs and replacement parts.